30 years experience of development
BioRow has more than 30 years experience of development of sensors and electronics for rowing. A brief history of some developments can be found in BioRow Newsletter 2018/01.
All BioRow sensors are designed with rowing in mind, that mean they are made as light as possible, unobstractive for rowers, waterproof and well calibrated to suit rowing forces and movements.
You can order a complete standard BioRowTel system as a set, and also you can order its parts separately, as well as additional sensors (like stretcher force, gate force, etc.) for your specific research purposes.
1D Flat stretcher force plate
This stretcher force sensor consists of two plates and load cells in between them. The shape of the ..
£1 200.00UK Ex Tax: £1 200.00UK
2D Flat stretcher force plate
The sensor has similar design with our BioRow 1D Flat stretcher force sensor, but the load sell..
£1 800.00UK Ex Tax: £1 800.00UK
2D Instrumented oarlock (sculling or sweep)
BioRow 2D Instrumented gate has the same external dimensions as 1D gate, but in addition to the norm..
£900.00UK Ex Tax: £900.00UK
2D Oar Angle sensor
BioRow 2D Oar Angle sensor measures movements of the oar shaft in horizontal and vertical planes, wh..
£420.00UK Ex Tax: £420.00UK
3-point stretcher force sensor for boat
The stretcher force is not easy to measure and analyse because its direction and centre of applicati..
£1 200.00UK Ex Tax: £1 200.00UK
3D Pin Force sensor (Instrumented C-bracket)
This sensor was made for research purposes mainly, where sophisticated analysis of balance of fo..
£1 500.00UK Ex Tax: £1 500.00UK
4D Instrumented Handle
Our BioRow 4D Instrumented Handle sensor for a sculling oar has been developed and successfully test..
£1 250.00UK Ex Tax: £1 250.00UK
BioRowTel Master unit
Master unit is a core module of BioRow telemetry system, its v.5 contains the following features: ..
£2 900.00UK Ex Tax: £2 900.00UK
Data Collector
BioRow Data Collector is the simplest and cheapest electronics unit produced by us. It simply connec..
£300.00UK Ex Tax: £300.00UK
Instrumented gate
This gate design was created in 2010 and represents the fifth generation of our Instrumented gat..
£600.00UK Ex Tax: £600.00UK
Oar bend (force) sensor
The sensor is attached to the oar shaft (which is used as a load cell) and measures its bend during ..
£320.00UK Ex Tax: £320.00UK
Position sensors
Seat movement is very important in rowing, because it closely related to the movements of rower’s ce..
£380.00UK Ex Tax: £380.00UK
Slave extension unit
Slave unit is used as an extension for the Master unit to provide measurements in big boats. Similar..
£480.00UK Ex Tax: £480.00UK
Wind Meter
BioRow Wind Meter is intended for measurements of the wind speed and direction during rowing. It ..
£380.00UK Ex Tax: £380.00UK
Force Sensor for a rowing machine
This force sensor can objectively and independently measure the handle force on a rowing machine of ..
£450.00UK Ex Tax: £450.00UK