Slave unit is used as an extension for the Master unit to provide measurements in big boats. Similar to the Master, each Slave has two ports four channels each, which means it can collect data from two oars: one Slave extension unit (together with the Master unit) is required to measure double or four, three Slave units required for a quadruple scull or eight.

Slaves are connected with Master and between themselves with cables in a chain, which provides power, synchronisation and data stream. When the Master unit starts, it automatically detects number of connected Slaves, and its sequence: the closest Slave is assigned as N2 (N1 is inbuilt in the Master), next one as N3, etc. Therefore, any Slave can be used at any position in a boat without manual number assignment.

Single Slave unit can also work as an independent data collector for 8 analogue channels, when it is connected to USB port and powered from it with a special cable.

Specifications:

  • Dimensions:       65x50x35mm,
  • Weight                100g;
  • Connections:     to Master unit in a chain, or to USB port.

Write a review

Note: HTML is not translated!
    Bad           Good

Slave extension unit

  • Product Code:
  • Availability: In Stock
  • £480.00UK

  • Ex Tax: £480.00UK

Related Products

BioRowTel System

BioRowTel System

BioRowTel Measurement System Overview The BioRowTel system measures the most essential compone..

£8 325.00UK Ex Tax: £8 325.00UK

BioRowTel Master unit

BioRowTel Master unit

Master unit is a core module of BioRow telemetry system, its v.5 contains the following features: ..

£2 900.00UK Ex Tax: £2 900.00UK

Tags: Slave extension unit